Metal Machinery Equipment & Supplies Category

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
RW AODD PUMP pneumatic double diaphragm pump. AODD PUMP, pneumatic diaphragm pump Air operated double diaphragm pump uses compressed air as the power source and used to convey various corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids. Pump body material can be plastic, aluminum alloy, cast iron, stainless steel etc. and diaphragm materials can be Santoprene, nitrile rubber, neoprene ,viton, Teflon etc according to the pumped liquids. The pump has self-priming function. It can idle and can submersible for working. The fluid conveyed is very wide, from low viscosity to high viscosity, from corrosive to viscous, fluids containing solid particles etc. No dynamic seal, no leakage Application 1. Pump peanut butter, pickles, mashed potatoes, sausage, jam, applesauce, chocolate, etc. 2. Pump paint, gum and pigment. 3. All kinds of adhesive and glue can be pumped. 4. All kinds of tile, porcelain, tile and ceramic glaze. 5. After the oil well is drilled, pump sediment and grout. 6. Pump various emulsions and fillers. 7. Pump all kinds of sewage. 8. Use the pump as the oil tanker and the barge to clear the warehouse and absorb the sewage in the warehouse. 9. Hops and fermented powder syrup, syrup, molasses. 10. Pump the water in the mine, tunnel, tunnel, mineral processing and slag. Pump cement grout and mortar. 11. Various rubber pastes. 12. Various abrasives, corrosive agents, oil and mud, cleaning oil dirt and general containers. 13. All kinds of highly toxic, flammable and volatile liquids. 14. Various strong acids, alkalis and corrosive liquids. 15. Various high-temperature liquids can withstand 150 degree celsius 16. As the front stage pressure supply device of various solid-liquid separation equipment.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
CDLF Vertical multistage centrifugal pump stainless steel material. Stainless steel Vertical multistage centrifugal pump The pump is for non-self-priming multistage centrifugal pump with Standard vertical motor and quick mount mechanical seal. It is used to transfer water or other industrial fluids with different flow rate, pressure and working temperature. The flow parts of pump are made of stainless steel SUS304 and replace CR,CRN centrifugal circulating pump. Pumped fluids 1.Thin, clean, non-flammable and explosive liquid without solid particles or fibers. 2, the pump can transport such as mineral water, softening water, pure water, oil and other light chemical medium. 3. When the density or viscosity of the conveying liquid is greater than that of water, high-power motor must be used if necessary. 4. When the pump is for a particular liquid, the important details such as the chlorine content, PH value, temperature and solubility, oil content, etc. should be given. 5. Norm temperature type；-15 to 70 DegC. Hot water type: 15 to 120 DegC. Application: 1. Water supply: filtration and conveying in water plants, water supply in water plants in different areas, pressurization by supervisors and pressurization in high-rise buildings. 2. Industrial pressurization: flow water system, cleaning system, high-pressure flushing system and firefighting system. 3. Industrial liquid conveying: cooling and air conditioning system, boiler feed water and condensing system, machine tool kit, acid and alkali. 4. Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator, swimming pool. 5. Irrigation: farmland irrigation, sprinkling irrigation and drip irrigation. Motor: Single phase/three phase 50HZ/60HZ 220V-240V, 380V-440V

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
CYZ Self priming centrifugal oil pump. Electric self-priming oil transfer pump fuel diesel kerosene conveying A self-priming pump can be installed high and dry above the fluid level while automatically removing air from the suction line and filling it with liquid without manual priming. These pumps are designed to prime themselves quickly and efficiently and can continue operating even if the liquid supply is interrupted. CYZ-A Self-priming centrifugal oil pump is widely used to transport gasoline, kerosene, diesel oil, oil for aviation in oil warehouse, oil station, oil tanker, dock, tank truck, airdrome etc. It can also be used in chemical industry, pharmaceutics, brewage, electroplate, printing and dyeing, papermaking, electric power, mine etc. Medium temperature range:-20 Celsius degree to 80 Celsius degree Viscosity is no higher than 100 centipoise, Particles consistency can reach 30 percent. Pump casing:cast iron, bronze impeller, Explosion-proof motor (EXDIIBT4)

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
YCB Gear oil transfer pump horizontal self priming type. Gear oil transfer pump Horizontal, self priming gear pump is used to transfer lubricating oil or other fluids similar to lubricating oil without solid particles and fibers at the temperature below 200 degree celsius and the viscosity of 5 to 1500 Cst. It can be also used in hydraulic system. Reducing the rotary speed, the pump can deliver the liquids whose viscosity can be up to 500,000Cst. YCB gear pump is mainly composed of gear, shaft ,shaft sleeve, pump body, pump cover and seal etc. The gears are adopted double circular teeth shape, which makes the gears less wear on gear surface, stable revolution, low noise,long service life and high efficiency. Seals can be mechanical seal or packing seal, which can be chosen according to the user’s requirements. Application: 1. as transfer pump or booster pump in oil delivery 2. as fuel pump for delivery system, pressurization and injection in fuel supply system. 3.as the firefighting equipment to transfer foam liquid 4. as hydraulic pump supplying hydraulic power in hydraulic system 5.as lubricating pump in all industry fields.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI,CHINA SHANGHAI
CQB-F fluoroplastic magnetic driving chemical industrial centrifugal pump. Fluoroplastic magnetic driving chemical industrial pump The flow parts of CQB-F fluorine plastic magnetic chemical pump are for fluorine plastic (F46/PFA/FEP/PTFE/ETFE/PVDF etc.) materials. Pump outer casing is for metal material (cast iron or carbon steel) to be enough for supporting pipeline weight and resisting mechanical impact. Flow parts of CQB-F fluoroplastic liner magnetic pump are made of fluoroplastic (F46/FEP/PFA) and have a very good corrosion resistance. CQB-F fluoroplastic liner magnetic pump can transport any concentration of acid, alkaline, oil, rare and valuable liquid, toxic liquid, volatile chemical medium. It is especially suitable for the transport of flammable, leaky and explosive liquid chemical medium. Sliding bearing of magnetic pump can be impregnated graphite, filled with polytetrafluoroethylene, engineering ceramics, etc. Because engineering ceramics have good heat resistance, corrosion resistance and friction resistance, the sliding bearings of magnetic pump are mostly made of engineering ceramics. Because the engineering ceramics are very brittle and the expansion coefficient is small, the bearing clearance shall not be too small to avoid shaft holding accident. CQB-F Fluoroplastic chemical industry magnetic pump has the advantages of compact structure, beautiful appearance, small volume, low noise, reliable operation and so on. CQB Fluoroplastics magnetic driving centrifugal chemical pump can continuously transport acid, alkali, oxidant and other corrosive media with arbitrary concentration. Applicable temperature: -30℃-120℃

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI SHANGHAI
FSB fluoroplastic centrifugal chemical transfer pump. Fluorine plastic anti-acid pump. Single stage single suction Cantilever centrifugal pump. The flow components are all made of fluoroplastic, and the pump body is lined with polytetrafluoroethylene propylene (F46)，Equipped with WB2 series external mounted PTFE corrugated pipe mechanical seal. The pump has the advantages of strong corrosion resistance, with high mechanical strength, non- aging, and no toxin decomposition. FSB fluorine plastic pump is mainly suitable for transporting acids, alkalis, salts, strong oxidizing agents, and other corrosive media with any concentration for a long time. FSB-D type: Closed couple & FSB-L type: shaft coupling type

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI PORT
End suction centrifugal pump. End suction centrifugal pump An end suction pump is a type of centrifugal pump which has a casing with horizontal suction inlet and vertical discharge outlet. They are almost for single stage pumps which have only one impeller and impeller is cantilevered on one of the shaft. End suction pumps can be used for any transfer or circulation of liquid and are capable of handling clean or dirty liquids and liquids with low viscosity. They are available in a wide variety of material combinations to suit any application. When the liquid enters the pump, it moves along the blades of the impeller which increases the flowing speed of the liquid. Thereafter , the liquid is transported into the spiral casing where the high flowing speed of the liquid is converted into high pressure with the help of the diffusion process. IS type end suction pump is applicable to industrial and urban water supply and drainage, pressurized water supply for high-rise buildings, garden sprinkler irrigation, fire pressurization, long-distance transmission, HVAC refrigeration cycle, bathroom and other cold and warm water cycle pressurization and equipment supporting, with the operating temperature of T is not higher than 80 degree Celsius. IR horizontal hot water end suction pump is widely used in the pressurized circulation transportation of hot water from boilers in metallurgy, chemical industry, textile, paper making, hotels and restaurants and urban heating systems. IR type operating temperature is not higher than 120 degree Celsius. IH horizontal chemical industrial end suction pump is used to transport liquids without solid particles, with corrosivity and viscosity similar to water. It is suitable for petroleum, chemical, metallurgy, power, paper making, food and pharmaceutical, synthetic fiber and other departments, and its operating temperature is from – 20 to 120 degree celsius.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI PORT
AODD PUMP pneumatic double diaphragm pump. AODD PUMP, pneumatic diaphragm pump. Air operated double diaphragm pump uses compressed air as the power source and used to convey various corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids. Pump body material can be plastic, aluminum alloy, cast iron, stainless steel etc. and diaphragm materials can be Santoprene, nitrile rubber, neoprene ,viton, Teflon etc according to the pumped liquids.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---