Machinery and Equipment Category

Shipping Pt. / Location: CHINA, SHANGHAI PORT
D multistage horizontal centrifugal feed water pump. Horizontal multistage centrifugal pump D, DG type pump is horizontal, single suction multi-stage pump. It has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. D multistage horizontal pump is used for conveying clean water or other liquids similar in physical and chemical properties to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump flow parts, sealing form and increasing the cooling system. Application: D type multi-stage horizontal centrifugal pump is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire pressurization, long-distance water supply, heating, bathroom and other cold and warm water circulation pressurization and equipment, especially for small boiler water supply. Features: 1. Advanced hydraulic model, high efficiency and wide performance range. 2, Pump smooth operation, low noise. 3. The shaft seal adopts soft packing seal or mechanical seal, which is safe and reliable, simple in structure and convenient in maintenance. 4, the shaft is fully sealed structure, to ensure that no contact with the medium, no rust, long service life.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI PORT
YCB External Gear Oil Pump. The gear in the circular arc gear oil pump adopts the tooth profile compounded by advanced circular arc and other curves, so the pump has excellent working characteristics. The pump is compared with the traditional Involute gear oil pump; It is a new series of energy-saving pumps with the advantages of small pressure fluctuations, low noise, high efficiency, and long service life. YCB gear oil pump gear adopts double circular arc Sine wave tooth profile. Compared with Involute gear, its most outstanding advantage is that there is no relative sliding of the tooth profile during gear meshing, so the tooth surface is free of wear, running balance, no trapping, low noise, long life and high efficiency. This pump breaks free from the constraints of traditional design, allowing gear pumps to enter a new field in design, production, and use. The pump shaft end seal is designed in two forms: mechanical seal and packing seal. Users can choose according to their requirements Equipped with a differential pressure safety valve as overload protection, the total return pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted separately within the allowable discharge pressure range according to actual needs. However, this safety valve cannot be used as a pressure reducing valve for long-term operation, and can be installed separately on the pipeline if necessary. YCB gear oil pump application: It can be used as transmission and Booster pump in oil transmission system. It can be used as a fuel pump for transportation, pressurization, and injection in the oil transportation system. It can be used as a lubricating oil pump in all industrial fields. Application scope of YCB gear oil pump: YCB gear oil pump is suitable for conveying lubricating oil without solid particles and fibers, corrosiveness, temperature not higher than 80 degree celsius, viscosity of 5 to 1500cst or other liquids similar to lubricating oil.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI PORT
FSB fluorine plastic anti-acid pump. Fluorine plastic anti-acid pump Single stage single suction Cantilever centrifugal pump The flow components are all made of fluoroplastic, and the pump body is lined with polytetrafluoroethylene propylene (F46)，Equipped with WB2 series external mounted PTFE corrugated pipe mechanical seal. The pump has the advantages of strong corrosion resistance, with high mechanical strength, non- aging, and no toxin decomposition. FSB fluorine plastic pump is mainly suitable for transporting acids, alkalis, salts, strong oxidizing agents, and other corrosive media with any concentration for a long time, Application: The pump is widely used in industries such as petroleum, chemical, pharmaceutical, pesticide, pickling, dyes, paint, smelting, papermaking, electroplating, food, etc 1. Acid resistant type: suitable for conveying various strong acids or mixtures of acids and solvents. 2. Alkali resistant type: suitable for conveying alkaline clear liquids or mixtures of alkaline liquids and solvents. 3. Explosion proof type: suitable for conveying flammable and explosive liquids, equipped with explosion-proof motors. FSB-D type: Closed couple & FSB-L type: shaft coupling type

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI PORT
Hot oil circulating pump for thermal fluids heating system. RY Hot oil circulating pump for thermal fluids heating system Horizontal, Single stage single suction cantilever foot support structure, the inlet of pump is axial suction, the outlet is vertical upward. The pump is installed on the baseplate together with the motor. Double end ball bearing support with the front end with lubricating oil and the rear end lubricated with lubricating grease. There is a guide pipe in the middle for observing the sealing recovering thermal oil, Air-cooled for natural heating dissipation The combination of packing seal and mechanical seal is adopted. High-temperature resistant packing seal and hard alloy mechanical seal for the good sealing under high temperature conditions. PTFE lip seal. The pump is used to transfer high temperature liquids without solid particles. The fluids temperature up 350 degrees Celsius. Pump material: cast iron, stainless steel etc. Application Widely used in hot oil furnace oil supply circulation systems ! and hot oil heating circulation systems in industries such as petroleum, chemical, rubber, plastics, pharmaceuticals, textiles, printing and dyeing, road construction, food, and machinery etc.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI PORT
IS,ISR,IH horizontal single stage end suction centrifugal pump. Horizontal end suction single stage centrifugal pump Single stage single suction cantilever structure, (The impeller is directly installed on the pump shaft and has only one suction port), International standard ISO2858 design for the centrifugal pump IS pumps are usually made of cast iron and the pumps are mainly used to transport clean water. IS pumps are widely used in urban water supply, industrial cooling water systems, agricultural irrigation, fire water supply and other fields. IR pump adopts a high-tech resistant mechanical seal to transport high-tech fluids such as hot water up to 120 degrees Celsius IH pumps are usually made of stainless steel SUS304 or SUS316 or duplex stainless steel and the pumps are mainly used to transport chemical fluids in Industries such as chemical, pharmaceutical, food processing, and seawater desalination etc.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI PORT
ZW Self priming sewage pump. Self-priming non-clogging sewage drainage pump for waste liquids ZW Series self-priming non clogging sewage pump is an high-efficiency pump that combines self-priming function and non-clogging sewage drainage. ZW self-priming pump adopts an axial reflux external mixing design, which significantly increases its self-priming height. Compared with traditional self-priming pumps, its self-priming height can reach more than 5 meters. This feature enables ZW self-priming pumps to work more effectively in complex terrains or operating conditions that require a longer suction stroke, reducing efficiency losses caused by insufficient suction stroke. Combination of closed impeller and semi open impeller The impeller design of ZW self-priming pump is unique, combining the efficiency of a closed impeller with the anti-blocking ability of a semi open impeller. Closed impellers can provide higher head and efficiency, while semi open impellers can reduce the risk of blockage by passing larger particles and fibers. The impeller adopts a unique open design, allowing it to pass solid particles with a diameter of 60% of the pump diameter and fiber materials with a length of 5 times the diameter. This design not only improves the discharge capacity of the pump, but also reduces the possibility of blockage, ensuring long-term stability during operation. Excellent hydraulic model, the efficiency of ZW self-priming pump is 3-5% higher than that of general self-priming pump. Efficient and energy-saving not only reduces operating costs, but also reduces energy consumption, meeting modern environmental requirements. In addition, some models also adopt variable frequency controllers to further achieve energy-saving effects. Suitable for various complex working environments, including liquid extraction containing large solid particles and long fiber impurities. It can play an important role in fields such as electricity, mining, petrochemicals, and steel, especially in the treatment of wastewater containing solid-liquid mixtures. High quality mechanical seals In order to ensure long-term stability, ZW self-priming pump adopts high-quality mechanical sealing device. This not only effectively prevents liquid leakage, but also reduces the risk of contamination caused by leakage, ensuring a clean working environment.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---

Shipping Pt. / Location: CHINA, SHANGHAI PORT
RW Air operated pneumatic double diaphragm pump. Air powered diaphragm pump The air operated double diaphragm pump is the new conveying/transportation machinery /equipment using compressed air as the power source. Air distribution valves canceled traditional O type ring and cylindrical valve structure, using three-way operated, eliminating the valve dead center and pump stop phenomenon. Accurate and reliable directional signal avoid stop, and faster reversing leads to larger flow rate, which makes pulse smaller, more stable flow. It can pump various corrosive, volatile, flammable, poisonous liquids, even fluids with particles and high viscosity. Pump inlet /outlet diameter: 06mm (1/4inch), 10mm(3/8inch), 15mm(1/2inch), 20mm (3/4inch), 25mm(1inch), 40mm(1.5inch), 50mm (2inch), 80mm(3inch), 100mm(4inch) Pump body material: Acetal, PP, Aluminum alloy, Stainless steel (SS304, SS316), PVDF, Ductile iron Diaphragm material: Hytrel, Santoprene, PTFE, Buna N, Viton, Geolast Valve ball, valve seat material Acetal, PP, Aluminum alloy, SS304, SS316, Hytrel, PVDF, PTFE, Buna N, Vition, Geolast Main application: Chemical, petrochemical, paint, ceramics, metallurgy, environmental protection and medicine etc.

To view contact information or reply to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :

---